--- PORTAL OF POWER v0.62â/386 CONFIGURATION MENUS ---
                   (Press F10 from Portal WFC screen)

 Matrix information:
 ~~~~~~~~~~~~~~~~~~
 Address  1   :     1:  265/    1.    0  <-- This is your PRIMARY address
 Address  2   :     1:  265/  124.    0  <--  and akas
 Address  3   :     0:    0/    0.    0
 Address  4   :     0:    0/    0.    0
 Address  5   :     0:    0/    0.    0
 Address  6   :     0:    0/    0.    0
 Address  7   :     0:    0/    0.    0
 Address  8   :     0:    0/    0.    0
 Address  9   :     0:    0/    0.    0
 Address 10   :     0:    0/    0.    0
 Address 11   :     0:    0/    0.    0
 Address 12   :     0:    0/    0.    0
 Address 13   :     0:    0/    0.    0
 Address 14   :     0:    0/    0.    0
 Address 15   :     0:    0/    0.    0
 Address 16   :     0:    0/    0.    0
 Main address : 1
 SysOp name   : Your Name
 System name  : Your BBS name
 Point Net    : 0


 Standard modem options:
 ~~~~~~~~~~~~~~~~~~~~~~
 Comm port     : 2
 Baud rate     : 38400      <- Locked baud rate
 Locked baud   : /ARQ       <- Type connection string
 Modem preinit : |v``^``
 Modem init    : ATZ1|
 No answer cmd :
 Hang-up cmd   :
 Modem dial    : ATDT
 Modem answer  : ~~~ATA|
 Modem busy    : ^```ATH1|
 Check connect : N
 Modem re-init : 00:05:00   <-Re-init modem during WFC
 Time to Wait  : 00:01:20   <-Pause time before re-dial after BUSY


 Advanced modem options:
 ~~~~~~~~~~~~~~~~~~~~~~
 Internal fax  : N
 Exit connect 1:              Errorlevel : 0
 Exit connect 2:              Errorlevel : 0
 Exit connect 3:              Errorlevel : 0
 Exit connect 4:              Errorlevel : 0
 Exit connect 5:              Errorlevel : 0

 Type   Dial string                     Baud rate          Call
 HST                                    0                  Y
 V32B                                   0                  Y
 V34                                    0                  Y
 V34T                                   0                  Y
 V42B                                   0                  Y
 VFC                                    0                  Y
 ISDN                                   0                  N


 Directories & files (MUST match Squish & Telegard!):
 ~~~~~~~~~~~~~~~~~~~
 Unknown inbound  : C:\MSG\IN\
 Known inbound    : C:\MSG\IN\
 Password inbound : C:\MSG\IN\
 Outbound         : C:\MSG\OUT
 Nodelist         : C:\NODE\
 User filename    :

 Log filename     : C:\TG\LOGS\PORTAL.LOG
 Log level        : 5                   <-Level 5 will capture CID info :)
 Use year in log  : N

 Default macros   :
 Editor           : TIM.BAT             <-I use timEd
 BBS path         :                     <-Leave blank for TG
 Swap path        : C:\POP\
 BBS type         : None
 Banner           : C:\POP\BANNER.TXT
 Nodelist type    : Version 7


 Event:
 ~~~~~
 Start time       : 03:01
                    Init  Mail  Poll  File
 Exit errorlevels : 0     155   0     150    <-Match errorlevels in POP.BAT
 Max. bad WaZoo   : 5                  Max. busy    : 12
 Call frequency   : 00:00:30           Max. delay   : 00:02:00
 Description      : FIDO Mail Poll                <- Sample mail poll event
 Connect to       :     1:   13/   25.    0       <- Uplink's address
                    MTWTFSSA
 Active days      : YYYYYYYY                  <-Set "A" to "N" to deactivate
 Date to run      : 0                  Month to run : 0
 Task number      : 0
 Special dial     : 0
 Schedule number  : 1                              <-See Schedules (later)
 Max. cost        : 0                  Min. mail    : 0


 Connection SetUp:
 ~~~~~~~~~~~~~~~~
 BiModem name        :
 Max FullDuplex baud : 38400
 FullDuplex override : /ARQ
 Override NoSend     : N
 Use Janus transfers : N    <-Portal has built-in bi-directional transfers
 Use EMSI handshake  : Y
 Call faster systems : Y
 Curmudgeon          : N
 Minimum BBS Baud    : 9600
 Slow caller infofile: TOOSLOW.TXT
 User errorlevel     : 201           <- MUST match POP.BAT errorlevel 201
 Call frequency      : 00:04:00
 Max call delay      : 00:02:00
 Zone Mail Hour      : 04:00 - 05:00
 Max RINGING         : 10
 Press ESC prompt    : Press ESC to enter the Circle Circus...
 Doing mail text     : Logons not accepted during Mail Hour (4:00am - 5:00am
 Enter BBS text      : Please wait while we load the BBS...


 Mail scanner: Netmail Options:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Netmail dir   : C:\MSG\NET\   <- MUST match Squish & Telegard!
 Strip crash   : Y
 Set AKA sent  : N
 Save fwd mail : N
 Forward mail  : Y
 Kill fwd files: N
 Hudson netmail: 0


 Mail scanner: Echomail Options:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Save dupes dir: C:\MSG\DUPE\         <- MUST match Squish
 Max dupes     : 0
 Echotoss log  : C:\SQ\ECHOTOSS.LOG   <-   "    "     "
 Secure        : N
 Old extension : N
 Private EMail : Y


 Scheduler SetUp:
 ~~~~~~~~~~~~~~~
 Num Sub Action/Type          Send to                                       S
   1   0 Poll (see below)     1:13/25                                       C
   2   0 Poll                 1:265/2                                       C


 Schedule 1 example:
 ~~~~~~~~~~~~~~~~~~
 Schedule number    : 1
 Sched. sub line    : 0
 Action             : Poll
 Send to            : 1:13/25
 Stat               : C


 Echo areas:
 ~~~~~~~~~~
 Main area tag                    Description
 * * * * * * * * * *  N O   R E C O R D S   I N   F I L E  * * * * * * * * * *


   [I don't use this because all info is in SQUISH.CFG already.]


 Mail scanner: Misc. Options:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Bad msg. dir. : C:\MSG\BAD\    <- MUST match Squish
 Default packer: ZIP
 Renum limit   : 0
 Force Write in place mode : N


 Nodelist compiler: Translation table entries:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Original                           New
 1-703-201                          201
 1-703-204                          204
 1-703-205                          205  (These ac/prefixes are all local
 1-703-207                          207     to me...)
 1-703-209                          209
 1-703-212                          212
 1-703-213                          213
 ...etc...


 Nodelist compiler:
 ~~~~~~~~~~~~~~~~~
 Costfile name    :      (I use FastV7 compiler, instead...)
 Our dial prefix  :
 Int. dial prefix :
 Use FIDOUSER.LST : Y

 Modem type #1    : HST
 Modem type #2    : ISDN
 Modem type #3    : V32B
 Modem type #4    : V34
 Modem type #5    : V34T
 Modem type #6    : V42B
 Modem type #7    : VFC
 Modem type #8    : ISDN
 Modem type #9    : ZYX


 OK FILE ("freq" list"):
 ~~~~~~~
 Sta Magicname  Path                        Password   Lvl Keys     Free
 All *.*       C:\FIL\BBS-LIST\ALLFILES.ZIP             0 00000000 Totally
 All *.ZIP     C:\FIL\BBS-LIST\ALLFILES.ZIP             0 00000000 Totally
 All ALLFILES  C:\FIL\BBS-LIST\ALLFILES.ZIP             0 00000000 Totally
 All BACKBONE  C:\FIL\BBS-NETS\BACK*.*                  0 00000000 Totally
 All CCNEW     C:\FIL\BBS-LIST\CCNEW.ZIP                0 00000000 Totally
 All DOORS     C:\FIL\BBS-LIST\DOORS.ZIP                0 00000000 Totally
 All FILEBONE  C:\FIL\BBS-NETS\FILEBONE.*               0 00000000 Totally
 All FILES     C:\FIL\BBS-LIST\ALLFILES.ZIP             0 00000000 Totally
 All GAMES     C:\FIL\BBS-LIST\GAMES.ZIP                0 00000000 Totally
 All INTER     C:\FIL\PRG-QBAS\INTER5*.ZIP              0 00000000 Totally
 All NODEDIFF  C:\FIL\BBS-NETS\NODEDIFF.A*              0 00000000 Totally
 All NODELIST  C:\NODE\NODELIST.ZIP                     0 00000000 Totally
 All PORTL     C:\FIL\BBS-LIST\PORTL.ZIP                0 00000000 Totally
 All PROGS     C:\FIL\BBS-LIST\PROGS.ZIP                0 00000000 Totally
 All TELEGARD  C:\FIL\BBS-TGAR\TG_302.ZIP               0 00000000 Totally
 All TG*.*     C:\FIL\BBS-LIST\TGARD.ZIP                0 00000000 Totally
 All TG-GAMMA  C:\FIL\BBS-GAMA\TG_309*.ZIP              0 00000000 Totally
 All TGARD     C:\FIL\BBS-LIST\TGARD.ZIP                0 00000000 Totally
 All USBBS     C:\FIL\BBS-LIST\USBBS???.ZIP             0 00000000 Totally


 Ok-File (detail example):
 ~~~~~~~~~~~~~~~~~~~~~~~~
 Node status : All
 Magic name  : *.*
 File path   : C:\FIL\BBS-LIST\ALLFILES.ZIP
 Password    :
 Level       : 0
 Keys        : 00000000
 Free area   : Totally  <- Means let anyone freq files; even unlisted nodes
 Task number : 0


 Request options:
 ~~~~~~~~~~~~~~~
           --------- Per call ---------     --------- Per day ----------
             Num.       Time      Bytes       Num.       Time      Bytes
 Password :    15   00:45:00          0          0   00:00:00          0
 Known    :    15   00:45:00          0          0   00:00:00          0
 Unknown  :    15   00:45:00          0          0   00:00:00          0


 Send RSP-file as message : Y  <-Rsp-file = PORTAL.TPL template
 Stop search after match  : N
 Minimum baud for request : 9600


 Nodes Setup:
 ~~~~~~~~~~~
 Address          Lvl  Keys      BBS Open
 1:13/25.0         0  00000000  00:00 - 00:00
 1:265/0.0         0  00000000  00:00 - 00:00
 1:265/2.0         0  00000000  00:00 - 00:00  (Uplink & Downlink addresses)
 1:265/100.0       0  00000000  00:00 - 00:00
 1:265/103.0       0  00000000  00:00 - 00:00


 Nodes setup (detail example):
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Address         :     1:   13/   25.    0                   Pointnet :     0
 Phone number    :                     Packer          : ZIP
 Level           :   0                 Keys            : 00000000
 Session password: ******              PortalFix passwd: ******
 Packet password :                     Tick password   : ******
 Special dial 0  :
 Special dial 1  :
 Special dial 2  :

 Send flavor     : D                   Send fwd letter : N
 Check connect   :                     Use Fake        :
 Disallow F.Req. : N                   Use FullDuplex  :
 Use EMSI        : Y                   Pack Tick files : N
 BBS open from   : 00:00 to 00:00      Sync. time      : N


 Tick: Misc. setup:
 ~~~~~~~~~~~~~~~~~
 Dupe directory       : C:\MSG\DUPE\  (I use SEAL v0.50 for .TIC processing)
 Hold directory       : C:\MSG\OUT\
 Do before processing :
 Request missing      : N


 Function keys:
 ~~~~~~~~~~~~~
  #  Lvl  Description (CTRL-keys)
   1 101  Local Logon               NOTE: Lvl MUST equal a defined eerorlevel
   2 155  Toss Incoming Mail              in your POP.BAT config. This menu
   3   0                                  allows you to call whatever you
   4   0                                  want from your WFC screen.
   5 180  Get BWave Mail
   6 170  Send BWave Mail
   7   0
   8   0
   9   0
  10 110  View Sysop Log

  #  Lvl  Description (ALT-Keys)
   1 175  BWave Reader
   2   0
   3   0
   4   0
   5   0
   6   0
   7   0


 Dumb terminal misc. options:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Modem init     : ATZ1|
 CR sends LF    : N
 Destructive BS : Y


 PoP-List: Misc. options:
 ~~~~~~~~~~~~~~~~~~~~~~~
 Adopt files    : N     NewsList days  : 0     Update OK-File : N
 Incl statistics: N     Incl TopList   : N     Remove missing : N
 European dates : N     Top X (numbers): 0     Dupe threshold : 0
 Dupe check     : N     Touch Illegal  : N     Zap ZeroLength : N

 Adopt comment  :
 Freq NOT OK    :            (I don't use any of this stuff)
 Freq for ALL   :
 Freq for KNOWN :
 Freq for PWD   :

 Delete         Exclude       NoDupeCheck  NoAdopt       NoAdopt  Private
 FileNames      FileNames     FileNames    FileNames     areas    areas


 Archiver setup:
 ~~~~~~~~~~~~~~
       Add               Unpack            Test              Erase
 ARC : PKPAK.EXE -oc -a  PKUNPAK.EXE -r $a PKPAK.EXE t $arch PKPAK.EXE d $arch
 ZIP : PKZIP.EXE -a $arc PKUNZIP.EXE -e -o PKUNZIP.EXE -t $a PKZIP.EXE -d $arc
 LZH : LHARC.EXE a /m $a LHARC.EXE e /m $a LHARC.EXE t /m $a LHARC.EXE d /m $a
 PAK : PAK.EXE a $archiv PAK.EXE e /WA $ar PAK.EXE t $archiv PAK.EXE d $archiv
 ZOO :
 SQZ : SQZ.EXE a -q $arc SQZ.EXE e $archiv SQZ.EXE t $archiv SQZ.EXE d $archiv
 ARJ : ARJ.EXE a $archiv ARJ.EXE e -y $arc ARJ.EXE t $archiv ARJ.EXE d $archiv

 Archiver setup (detailed examples for above):

  AddCommand               1 PKPAK.EXE -oc -a $archive $filespec
  UnpackCommand            1 PKUNPAK.EXE -r $archive $filespec
  EraseCommand             1 PKPAK.EXE d $archive $filespec
  TestCommand              1 PKPAK.EXE t $archive $filespec

  AddCommand               2 PKZIP.EXE -a $archive $filespec
  UnpackCommand            2 PKUNZIP.EXE -e -o $archive $filespec
  EraseCommand             2 PKZIP.EXE -d $archive $filespec
  TestCommand              2 PKUNZIP.EXE -t $archive $filespec

  AddCommand               3 LHARC.EXE a /m $archive $filespec
  UnpackCommand            3 LHARC.EXE e /m $archive $filespec
  EraseCommand             3 LHARC.EXE d /m $archive $filespec
  TestCommand              3 LHARC.EXE t /m $archive $filespec

  AddCommand               4 PAK.EXE a $archive $filespec
  UnpackCommand            4 PAK.EXE e /WA $archive $filespec
  EraseCommand             4 PAK.EXE d $archive $filespec
  TestCommand              4 PAK.EXE t $archive $filespec


 Misc. screen options:
 ~~~~~~~~~~~~~~~~~~~~
 Screenblank timeout  : 00:02:00
 43/50 lines          : N
 Check for snow       : N
 Keep off screen mode : Y
 Exploding windows    : N
 Hardware screenblank : Y


 Inbound Control:
 ~~~~~~~~~~~~~~~
                        Unknown       Known           Password
 Process tick files :      N              N              N
 Forward files      :      N              N              N
 Process mail       :      N              N              N


       (Mine is all handled by Squish & Seal.)


 Global values:
 ~~~~~~~~~~~~~
 Task number                   : 0
 Delay between outbound reread : 01:00:00
 Rescan on dial if no mail     : N
 Password for function request :
 Swap on exec                  : Y
 Keep empty outbound dir's     : N


This concludes the Portal configuration, but to make it all work, you
must also create the POP.BAT file.  This is where you will define your
custom errorlevels for callers, mail, events, the function keys at the
WFC screen, calling up your message editor/reader, etc.  Below is a
sample POP.BAT.  If you want to cut & paste this, remove all comments.